LEIPOLE JWT6013 electromechanical hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater, it will activate the heater at the humidity set point in order to increase the dew point. The critical relative humidity level for most components is about 65%. Above 65% RH, condensation can occur inside enclosure and in long run, this likely causes corrosion and permanent damage to your electronic components and systems.
LEIPOLE JWT6013
ELECTROMECHANICAL HUMIDITY CONTROLLER
Certification: CE, RoHS
PRODUCT ENQUIRY FORM
SPECIFICATION
| JWT6013 | |
|---|---|
| Setting range | 30% – 90% RH |
| Switching difference | 4% RH (± 3% tolerance) |
| Permissible air speed | 15 m/s |
| Contact type | SPDT change-over contact |
| Maximum switching capacity | 5 A resistive at 250 VAC DC 20W |
| Electrical connection | 3-pole terminal, clamping torque 0.8 Nm max. Solid wire - AWG 14 max. (2.5 mm²) |
| Protection type | IP 20 |
| Housing material | ABS, UL 94V0 |
| Storage temperature | -20 °C to 80 °C |
| Installation | 35mm din rail mounting |
| Dimension | 67 x 50 x 38 mm |
