16 bit input / output terminal block

T004 (NPN) / T004-P (PNP)  this 16 bit input/output terminal block is usable for any brand of PLC module with 16 bit I/O
– uses a 20P MIL connector as the incoming terminal connection
– use in combination with our SIRON series of cable connector
– the block is divided into 2 sets of 8 bit terminals
– with each signal LED display for easy I/O status check, making wiring & trouble-shooting easier
– easy mounting clip-on DIN Rail
– compact size 65 x 57 x 18 mm

T005 (NPN) / T005-P (PNP)  this 16 bit input terminal block specially applicable to the input of MITSUBISHI and NAIS PLC
– uses a 20P MIL connector as the incoming terminal connection
– use in combination with our SIRON series of cable connector
– the block is divided into 2 sets of 8 bit terminals
– with each signal LED display for easy I/O status check, making wiring & trouble-shooting easier
– easy mounting clip-on DIN Rail
– compact size 65 x 57 x 18 mm

T006 (NPN) / T006-P (PNP)  this 16 bit output terminal block specially applicable to the output of MITSUBISHI and NAIS PLC
– uses a 20P MIL connector as the incoming terminal connection
– use in combination with our SIRON series of cable connector
– the block is divided into 2 sets of 8 bit terminals
– with each signal LED display for easy I/O status check, making wiring & trouble-shooting easier
– easy mounting clip-on DIN Rail
– compact size 65 x 57 x 18 mm

For it’s corresponding connecting cable from Terminal block to PLCs, refer PLCs Interfacing Cable MIL, FCN, Ribbon