COMELETRIC R8
The R8 series miniature switches are used in all types of auxiliary circuits to connect and disconnect relays, measuring instruments and many others.
Due to its unique construction features, they can be used despite hostile environmental and climatic conditions. On top of benefits present in all switches, the R8 also has Silver or Gilded plated contacts. The limited dimensions allow minimal occupation of space both inside and on the front of the panel.
Model R801
– 2 to 8 positions Fixed or with automatic return
– Up 12 Packets of contacts can be assembled
– Captive screws, suitable for wiring with forks/pins with cable lug size 2.5mm
– Frontplate 30x30mm
Model R802 (Key Operated Switch)
– This model is used when activation by non-authorized staff has to be prevented.
– Key can be removed in different positions as per specific needs
– Can be supplied with fixed positions or with spring return
– Keys can be supplied all similar, all different or different in groups
Model R804 (with frontplate 48x48mm)
– 2 to 8 positions
– Up 12 Packets of contacts can be assembled
– Captive screws, suitable for wiring with forks/pins with cable lug size 2.5mm
– Frontplate 48x48mm
– Wide range of handles and frontplates available
Model R805 (Key Operated Switch with frontplate 48x48mm)
– This model is used when activation by non-authorized staff has to be prevented.
– Key can be removed in different positions as per specific needs
– Can be supplied with fixed positions or with spring return
– Keys can be supplied all similar, all different or different in groups
– Frontplate 48x48mm
Model R810 (Low Profile Handle)
– This design reduces the footprint of the front of the switch, with a single hole fitting diameter of 30.5mm.
– Suitable to be mounted in Control desk , Cockpit and Mimic panel,
– Single hole mounting 30.5mm.
Model R812
– Suitable to be mounted on DIN Rail EN60715
– Reverse mounting of the contact body to enable the access to screws from the front of the switch